Product ID:AMBERLITE-R IRA-900 RESIN, 69385
MSDS Date:08/01/1991
FSC:6810
NIIN:01-014-1028
MSDS Number: CBQNC

ROHM AND HAAS CO

100 INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19106-2399
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

BENZENEMETHANAMINIUM AR-ETHENYL-N,N,N-TRIMETHYLCHLORIDE

CAS: 60177-39-1

Fraction By Weight: 35-55%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 45-65%

OSHA PEL N/K

ACGIH TLV: N/K

32.0F,0.0C. %

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 45-60%

OSHA PEL N/K

ACGIH TLV: NOT APPLICABLED

THIS EXPANSION CAN CAUSE GLASS COLUMNS TO SHATTER.

RTECS: 9999999ZZ

MANUAL OF REC PRACTICE PUBLISHED BY AMERICAN

RTECS: 9999999ZZ

INSTALLATION, USE, AND MAINTENANCE OF EXHAUST

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MATERIAL CAN CAUSE EYE
IRRITATION. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH A LARGE AMOUNT OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD IF IRRITATION PERSISTS. SKIN: FLUSH WITH
COPIOUS AMOUNTS OF WATER. SEE MD . INHALATION: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN OR ARTIFICIAL RESPIRATION) .
INGESTION: CALL MD IMMEDIATELY .

Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATES TOXIC FUMES OF
NITROGEN OXIDES, HYDROGEN CHLORIDE.

Spill Release Procedures:WEAR GLOVES MADE OF COTTON OR CANVAS, SAFETY
GLASSES (ANSI Z87.1 OR APPROVED EQUIVALENT). FLOOR MAY BE SLIPPERY.
USE CARE TO AVOID FALLING. TRANSFER SPILLED MATERIAL TO SUITABLE
CONTAINERS FOR RECOVER Y OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT TEMPS BETWEEN 32F/0C &
140F/60C. AVOID RPTD FREEZE-THAW CYCLES. BEADS MAY FRACTURE. MAX
REC OPERATING TEMP FOR THIS MATL IS 170F/70C.
Other Precautions:PROPERLY DESIGNED EQUIP IS VITAL IF THESE ION
EXCHANGE RESINS ARE TO BE USED IN CONJUNCTION W/STRONG OXIDIZING
AGENTS SUCH AS NITRIC ACID TO PVNT RAPID BUILD-UP OF PRESS & POSS
EXPLO. CONSULT SOURCE K NOWLEDGEABLE IN HNDLG OF THESE (SUP DAT)

Respiratory Protection:RESP PROT PROGRAM MEETING OSHA 1910.134 & ANSI
Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CNDTNS
WARRANT RESP USE. NONE REQUIRED UNDER NORM OPERATING CNDTNS. USE
NIOSH/MSHA APPRVD RESP APP ROP FOR EXPOS OF CONCERN .
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLICATN
OF THIS MATL. REFER TO CURRENT EDITION OF INDUS (SUP DAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: MATLS BEFORE PRECEDING. DO NOT PACK COLUMN W/DRY ION
EXCHANGE RESINS. DRY BEADS EXPAND WHEN WETTED. THIS EXPANSION CAN
CAUSE GLASS COLUMN TO SHATTER. VENT: VENT: A MANUAL OF REC PRACT
PUBL ISHED BY AMERICAN CONFERENCE OF GOVT INDUS HYGIENISTS FOR INFO
ON DESIGN, INSTALLATION, USE & MAINT OF EXHAUST SYS.

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17
Vapor Density:<1
Spec Gravity:1.0-1.3(H*2O=1)
pH:5-9
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:BEADS

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
MONOMER VAPORS, OXIDES OF NITROGEN, ALKYLAMINES, HYDROGEN CHLORIDE.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE, AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL ME THOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.